We repair, rebuild, or replace damaged hatches, lids, and access panels to keep your boat watertight, functional, and looking great. From fiberglass repairs to new custom lids, we deliver durable solutions built for the marine environment.
Hatches, lids, and access panels allow you to reach essential components like storage, batteries, fuel systems, and plumbing. Over time, they can crack, leak, become loose, or suffer delamination. We repair damaged fiberglass, replace hardware, rebuild lids, or fabricate new custom panels to ensure a proper fit, watertight seal, and long-lasting durability.
Get Your Hatch or Panel Repaired
Fix cracks, delamination, and impact damage.
Hatch lids get stepped on, slammed and baked in the sun, so cracks at the corners and hinge points are common, and a wet core can make a lid sag or delaminate. We grind out the damage, rebuild the laminate with new fiberglass and refinish in color-matched gelcoat. If a lid isn’t worth saving, we’ll tell you.
Get a Free Quote
Install new OEM or custom hatches and lids.
When a lid is warped, rotted through or simply no longer made, replacing it is often the better move. We can fit a new OEM-style hatch or build a custom fiberglass lid to suit the opening, then match it to your boat’s gelcoat and non-skid and set it up so it closes evenly.
Get a Free Quote
Hinges, latches, locks, and gas struts.
Salt air corrodes hinges and latches, and screws work loose until the mounting holes strip out. We replace worn hardware with marine-grade stainless, repair stripped or cracked mounting points in the fiberglass so the new hardware stays tight, and adjust everything so the lid closes evenly.
Get a Free Quote
Keep water out with new marine-grade seals.
Old gaskets flatten, crack and shrink, and once they do, rain and washdown water drip straight into the compartment below. We remove the old seal, clean the channel and fit a new gasket, then check how the lid sits in its frame and adjust it so it closes evenly before we test for leaks.
Get a Free Quote
Storage, electrical, fuel, livewell and more.
If you need to reach a pump, battery switch or fuel fitting that’s sealed behind fiberglass, a new access panel saves a lot of frustration. We cut and frame the opening, build a fiberglass panel or door to fit it, add hardware and a gasket where it needs to stay dry, and finish it to match.
Get a Free Quote
We follow a proven process to ensure your hatches, lids, and access panels are strong, watertight, and built to last in the marine environment.
We evaluate the damage, check for leaks, and determine the best repair or replacement.
We repair fiberglass or fabricate a new lid/panel and replace hardware as needed.
We install new gaskets, seals, and hardware for a watertight, secure fit.
We test the fit, check for leaks, and ensure everything operates smoothly.
With over 50 years of experience, we provide reliable, high-quality fiberglass and marine repair services. Our team is known for honest work, attention to detail, and results that last.
Usually, yes. We grind out the crack, rebuild the laminate with new fiberglass, and refinish the lid in color-matched gelcoat. If the lid is badly delaminated or the core is rotten, we’ll tell you whether a new lid will cost less than the repair.
Yes. We replace worn or corroded hinges, latches, locks, pulls and gas struts with marine-grade stainless hardware, and repair stripped or cracked mounting points so the new hardware stays tight.
Both. We can rebuild your existing lid, fit a new OEM-style hatch, or fabricate a custom fiberglass lid or access panel to fit the opening, finished to match your boat’s gelcoat and non-skid.
That’s the goal of every job. We check how the lid sits in its frame, fit new gaskets and seals, adjust the hardware so the lid closes evenly, and check for leaks before we hand the boat back.
A hardware or gasket replacement is often done in a day. Fiberglass repairs and new custom lids take longer, because the laminate and gelcoat need time to cure between stages. We’ll give you a timeline with your quote.
It depends on the size of the hatch, the damage, and whether we repair or replace it. Send us a few photos and we’ll give you a free, no-obligation quote.
Get a free quote and keep your boat watertight, functional, and looking its best.
Got a cracked lid, a leaking hatch or a panel that won’t stay shut? Fill out the form or give us a call — we’ll get back to you as soon as possible. Your boat deserves the best, and we’re here to make it happen.
Tell us about your boat and the damage. We’ll get back to you quickly.
Captain Levi is an AI assistant. Chats may be saved so our crew can follow up. Nothing here is a confirmed quote. Privacy
